|
POSIRED 2 Parallel Shaft and Right Angle Gearboxes
In this product range the demand for a gear program rich in variants
but with a minimum number of parts have been fulfilled.
High degree of standardisation and consistent modularity ensures
availability with short delivery time. A large number of standard
options with a great variety of versions guarantee optimal adaptation
in almost all areas of mechanical and system construction.
An extensive range of accessories increases the adaptation capacity
of this gear to various requirements. As a standard, fans, cooling
coil, external oil cooler, heating rods, torque supports, engine
consoles, sub-constructions and operation monitoring systems are
available.
Technical Data
Torque (T2max): up to 800.000 Nm
Transmission Ratio: up to 710 iN
Power Rating: up to 4.400 kW
POSIRED N Parallel axis Lifting gear with large axle bases
Lifting gears in which the cable drum and driving motor are arranged
in parallel require a step-down gear with a correspondingly large
axle base. The lifting gear gears in the POSIRED N series are designed
for this application and ideally bridge the given distance between
the motor and cable drum.
The development of this series was based on widespread experience
in crane engineering. The demands of this branch were largely taken
into account in this gear concept.
The accessories needed for this application such as elastic clutches,
barrel clutches, brakes, substructures, etc. are available and can
be supplied with the gear.
Technical Data
Torque (T2max): up to 500.000 Nm
Transmission Ratio: up to 500 iN
POSIRED D Right Angle Gearboxes
This universal and compact gearmotor is based on a modular system
with high output torque with a monobloc housing integrating a motor
bell housing. A large number of variants are available for each
size. The opportunity to mount brake motor makes this gearmotor
most suited for traverse movements in cranes or other large mobile
applications.
Main characteristics:
Horizontal or upright fitting position
Torque reaction arm integrated in the casing
6 frame sizes rated according to a modular system
Use of standard components from the Posired 2 program
Advantageous prices due to a low manufacturing proportion
Technical Data
Torque (T2max): up to 25.000 Nm
Transmission Ratio: up to 112 iN
Power Rating: up to 173 kW
POSIRED TS Double Shaft Gear
Fields of application for this series of gear are rolling mills,
profiling plants, crushers, double-shaft mixers, kneaders, compactors
and presses. These systems require two contra-rotating drives, such
as is provided by the Posired TS gear. The various designs, installation
possibilities and optional accessories of the basic range of POSIRED
2 gears can also be used for the double shaft gear POSIRED TS.
Technical Data
Torque (T2max): up to 110.000 Nm
Transmission Ratio: up to 140 iN
Centre distance (a): up to 656 mm
POSIRED R Gear for agitators, aerators, fan
Our mixer gears are primarily used in chemicals industry, though
they are also needed in other applications with a vertical shaft
position such as surface aerator, sifter, hydrostations and discharge
facilities.
The bearing base of the drive shaft is ideally suited to absorb
the reaction forces of the mixer; the housings are of monobloc design
and thus ensure a high rigidity with small installation space.
The helical gearing is case hardened, noise-optimised and ground
with a profile correction for an optimum load-bearing performance.
The wide variety of optional accessories for the basic range of
POSIRED 2 devices can also be used for the POSIRED R mixer gear.
Technical Data
Torque (T2max): up to 47.000 Nm
Transmission Ratio: up to 140 iN
| |
|
|
If you have any further questions, please contact us by
clicking on the link below.
|
 Contact
us |
|
